Hide pictures

Windows 7

  1. Click the Start Menu and then choose Control Panel. Click it once
  2. The new window will appear. Double click the Network and Internet option
  3. In the new window choose the first option - Network and Sharing Center. Click it once
  4. The new menu will open as shown below. Click on the Set up a new connection or network
  5. Various options of the connection setup will open. Click on the Connect to a workplace and then press the Next button
  6. In the new menu choose the Use my Internet connection (VPN) option
  7. The new window with the blank fields will appear. You have to fill in the fields in the following way:
    • In the Internet address field type the server address (IP address) that was sent to you in the welcome email after the registration has been done
    • In the Destination name field type the connection name of your choice. For example, you can call it Wirelayer
    • Tick the box next to the Don't connect now option
    • Press the Next button

  8. The window with User Name and Password fields will open. Fill in the fields in the following way:
    • In the User name field type your login that was sent to you in the welcome email
    • In the Password field type the password that you've received in the same email
    • You can tick the Remember this password box (which is optional) in order not to fill this field every time you want to connect to the Internet via VPN
    • You can also tick the Show characters box to see the characters you input in the Password field
    • Leave the Domain field blank
    • Press the Create button in the bottom right hand corner of the window

  9. You are connected message will appear on the screen, just press the Close button in the bottom right hand corner
  10. In order to invoke this connection later, press Start Menu - > Control Panel - > Network and Internet - > Network and Sharing Center. The menu with the created connections will appear. Click on your connection (in our example it's called Wirelayer). That's it - wave the Internet safely

Windows Vista

  1. Click the Start Menu and then choose Control Panel. Click it once
  2. The new window will appear. Double click the Network and Internet option
  3. In the new window choose the first option - Network and Sharing Center. Click it once, then press the Connect to a network option
  4. The following screen might look a bit different in your Windows Vista version. In any case, press the Set up a new connection or network option which looks like a link
  5. On the new screen click the Connect to a workplace option once, then press Next
  6. In the new menu choose the Use my Internet connection (VPN) option
  7. The new window with the blank fields will appear. You have to fill in the fields in the following way:
    • In the Internet address field type the server address (IP address) that was sent to you in the welcome email after the registration has been done
    • In the Destination name field type the connection name of your choice. For example, you can call it Wirelayer
    • Tick the box next to the Don't connect now option
    • Press the Next button

  8. The window with User Name and Password fields will open. Fill in the fields in the following way:
    • In the User name field type your login that was sent to you in the welcome email
    • In the Password field type the password that you've received in the same email
    • You can tick the Remember this password box (which is optional)
    • You can also tick the Show characters box to see the characters you input in the Password field
    • Leave the Domain field blank
    • Press the Create button in the bottom right hand corner of the window

  9. You are connected message will appear on the screen, just press the Close button in the bottom right hand corner
  10. At this stage we’ll double check the settings:
    • Please go to the Network and Sharing Center again and select the Connect to a network option
    • On the new screen you will see the newly setup connection name. In our case it’s called Wirelayer. Right click on it and select Properties
    • The window with tabs will appear. Select the Options tab and then press PPP Settings button in the bottom left hand corner of the window
    • Make sure that options Enable LCP extensions and Enable software compression are ticked. If they’re not – just tick them and press OK
    • Select the Security tab. Make sure the Typical (recommended settings) option is ticked. If it’s not – tick it. Also make sure that the box next to the Require data encryption is checked. Press OK
    • Select the Networking tab. Just two options have to be checked: Client for Microsoft Networks and Internet Protocol Version 4(TCP/IPv4). Deselect other checked options if needed or check the options mentioned above if they’re not checked. Press OK
  11. You may see the following window on your screen. In this case you need to select any option but the Public location one. Home option is just good enough
  12. Connect to the Internet as usual. You’ll wave it safely now

Windows XP

  1. Click the Start Menu and then choose Control Panel. Click it once
  2. On the new screen double click Network Connections option
  3. The new window will open with the left panel and the main screen. Select the Create a new connection option located on the left panel (upper left hand corner)
  4. After the New connection wizard screenis opened, press the Next button
  5. In the new window tick the Connect to the network at my workplace option and then press Next again
  6. On the following screen you’ll have to check the Virtual Private Network connection. Press Next
  7. On the new screen you’ll be suggested to give your connection a name. You can use any name of your choice. In our example it’s called Wirelayer. After you named the connection, press the Next button again
  8. In the new menu tick the Do not dial the initial connection option and press Next
  9. The next menu will suggest you to enter Host name or IP address. Type in the server address (IP address) that was sent to you in the welcome email after the registration has been done. Press Next
  10. On the next screen you may check the Add a shortcut to this connection to my desktop box for your convenience. It will allow you to access your VPN connection straight from your desktop. Finally, press theFinish button
  11. Click the newly created shortcut on your desktop and fill in required fields. The User name and the Passwordwere sent to you in the welcome email
  12. That’s it. Wave the Internet safely

Windows 8

  1. Move the mouse cursor in the right part of the Desktop to call menu and then click “Settings".
    Or move the mouse cursor at the left down corner to call thumbnail of the Start page and click there with the right mouse button
  2. In the opened menu click the “Control Panel”
  3. In the opened new window click the “Network and Sharing Center”
  4. In the opened new window click the “Set up a new connection or network”
  5. In the opened new window click the “Connect to a workplace”, then click the button “Next”
  6. In the new opened window click the “Use my Internet connection (VPN)”
  7. In the renewed window you can see the form which must be filled in next way:
    • In the “Internet address” field type the server address (IP address) that was sent to you in the welcome email after the registration has been done
    • In the “Destination name” field type the connection name of your choice. For example, you can call it Wirelayer
    • Click the button “Create”

  8. The creation window is closed. Open again the window “Network and Sharing Center” and click the option “Change adapter settings” in the top left part
  9. In the new opened window double click with left mouse button the created connection item
  10. The panel “Networks” will be shown in the right part of screen with the created connection item
  11. Click the created connection item with the left mouse button and then the button “Connect” is shown for it
  12. Click the button “Connect” and then the login form is shown. Fill in the “User name” and the “Password” fields with such data that were sent to you in the welcome email after the registration has been done. After that click the button “OK”
  13. The system checks your credentials and then your computer is connected to the Internet through VPN.

Privacy Policy

GENERAL PURPOSE

WireLayer.net (called “the Website” hereafter), the companies that own it (Digital Unity Ltd. of Canada and DU Digital Unity Ltd. of Cyprus) is a service whose purpose is to protect the internet connections, the data flows (especially in open Wi-Fi networks), and the right to privacy of its Subscribers. Another purpose is to make certain web services accessible to Subscribers located in those jurisdictions where such services are banned from public access by the respective jurisdictions. We, the creators of this service, have therefore designed it to fulfill this very purpose as much as possible, using the best technology available today.

COLLECTED INFORMATION

The Website supports various payment methods, such as credit cards, PayPal, WebMoney, c-gold, and Bitcoin. Depending on the payment method the Subscriber uses, certain information may or may not be required to be collected for the purpose of payment processing and validation.


Information collected by the Website

The information that we do require from all of our Subscribers is their email address. For those Subscribers who wish to pay by credit card or PayPal, it will also be necessary to provide their first and last names, country, state/province, city, address, and postal code. This information is only used for payment processing purposes, and is not shared with any third parties.

Information recoded by the Website

The Website records all IP addresses and general client data of its visitors, like any, or almost any, other Internet website does, for the general purpose of website security and validation of requests.

Information recoded by third parties

Some information is recorded by third parties, such as Google Analytics, for the purpose of analysis and categorization of the incoming traffic for advertising and awareness needs. The information collected by such services only includes basic client data, such as the operating system and the web browser used by the visitor.

INFORMATION NOT RECORDED BY THE WEBSITE

Some information is not recorded for the very purpose of security and data protection of the Subscriber. This information is Internet activity logs – that is, any information about the websites or traffic between the websites visited while connected to any one of our VPN servers are not recorded.

Important notice: While the purpose of our service is protection of privacy and security of our customers, we are strictly against any unlawful activity, which may be committed using the Internet. Therefore, if a prospective customer has any intent of using our services for concealing commitment of illegal activities, we strongly discourage such a person from registering an account with us. If it comes to our attention that something illegal is being done by one of our customers, an investigation may possibly reveal what person is committing that kind of activity.

BY USING THIS WEBSITE AND ITS SERVICES, YOU AGREE TO THIS PRIVACY POLICY AND ANY CHANGES HERETO IN THE FUTURE. YOU AGREE THAT WIRELAYER.NET MAY MAKE CHANGES TO THIS PRIVACY POLICY AT ANY TIME WITHOUT ANY GIVEN NOTICE AT ITS DISCRETION.

Last revised March 24, 2014